COMING SOON!
The Nelevation DCC MODULE is as self-contained board that connects to the Nelevator’s COMs port in order to enable the Nelevator to respond to NMRA standard DCC accessory commands.
For many years analogue control has been the de facto standard for model train control. However, in recent years the digital control of trains and ancillary equipment has gained a stronghold in the model railway market.
While the Nelevator can function perfectly happily in either control environment, the addition of a Nelevation DCC Module to any digital controlled track system incorporating a Nelevator will immediately enable you to control not only your locomotives via DCC, but your Nelevator too!
The module is powered directly from the Nelevator and so requires no additional power supply connections, just a connection to the Nelevator and to your DCC track/
Key Features
- Control your Nelevator with standard NMRA DCC accessory commands
- Uses output addressing mode for accessory commands from 1 to 2,044
- Configurable to respond to either “closed” or “thrown” accessory commands
- Low Power
- Plug ‘n’ play
- Simple to install and use
- Remotely powered from the Nelevator
- No external power supply or batteries required
- Optically isolated from the controlling DCC signals
- Prevents possible electrical damage to the Nelevator
- Three flexible address configuration modes:
- Addresses configurable by standard DCC Configuration Variables (CVs)
- Addresses configurable by simple “learning” mode
- Addresses configurable by jumper settings
DCC Module Specifications
Functional
- Accessory Addressing Mode: Output address mode
- Addresses Range: 1 to 2,044 inclusive
- Base Address Configuration Modes: 3 (CV mode, Learning mode and Jumper mode)
- CV Programming Modes: Service mode (Paged or Direct)
- Nelevator Address Range: 20 consecutive addresses
- Accessory Polarity Response: Configurable to “thrown” or “closed”
- Power: Remotely powered from the Nelevator
- Communications: NellyCOM with the Nelevator
Physical
- Height: 10 mm
- Width: 58 mm
- Length: 52 mm
- Weight: 100 g
Electrical
- Input Voltage: 12 V DC
- Input Current: 20 mA
- Power: 24 mW
Documentation
- DCC Module Quick Start Guide [PDF]
- DCC Module User Manual [PDF]